- Guaranteed Secure Payments on Every Order
- Refund if your item is not delivered or as described
- Buyer Protection after order confirmation
- Place of Origin: SHANDONG
- Brand Name: CATERPILLAR
- Model Number: CAT (Caterpillar)
Net Power - ISO 9249 151.0KW
Engine Model | Cat? C7.1 |
Bore | 105.0 mm |
Stroke | 135.0 mm |
Displacement | 7.01 l |
Maximum Gross Power - 2,000 rpm - ISO 14396 | 171.0 kW |
Maximum Gross Torque - 1,400 rpm | 1020.0 N·m |
Maximum Net Torque - 1,300 rpm | 931.0 N·m |
Rated Gross Power - 2,200 rpm - ISO 14396 | 168.0 kW |
Rated Net Power - 2,200 rpm - ISO 9249 | 151.0 kW |
WEIGHTS
Operating Weight | 18676.0 kg |
BUCKETS
Bucket Capacities | 2.5 m3 to 4.4 m3 (3.3 yd3 to 5.75 yd3) |
OPERATING SPECIFICATIONS
Breakout Force | 147.0 kN |
Note (1) | **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. |
Note (2) | *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Static Tipping Load - Full 40° Turn - ISO 14397-1* | 10503.0 kg |
Static Tipping Load - Full 40° Turn - Rigid Tires** | 11197.0 kg |
TRANSMISSION
Forward - 1 | 7.0 km/h |
Forward - 2 | 12.5 km/h |
Forward - 3 | 22.0 km/h |
Forward - 4 | 34.0 km/h |
Reverse - 1 | 7.0 km/h |
Reverse - 2 | 12.5 km/h |
Reverse - 3 | 22.0 km/h |
HYDRAULIC SYSTEM
Steering System - Pump Type | Piston |
Hydraulic Cycle Time - Dump, at Maximum Raise | 1.2 s |
Hydraulic Cycle Time - Lower, Empty, Float Down | 2.8 s |
Hydraulic Cycle Time - Raise from Carry Position | 6.1 s |
Hydraulic Cycle Time - Total Cycle Time | 10.1 s |
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 0.4 gal/min) | 27900.0 kPa |
Implement System - Maximum Pump Output at 2,200 rpm | 248.0 l/min |
Implement System - Optional 3rd Function Maximum Flow | 280.0 l/min |
Implement System - Optional 3rd Function Maximum Pressure @ 70 L/min | 20680.0 kPa |
Implement System Pump Type | Piston |
BRAKES
Brakes | Brakes meet ISO 3450 |
TIRES
Choices | Choices include: 23.5-25 16PR, L3 (Triangle); 23.5R25 ??, L3 (Triangle); 23.5R25 ?, L3 (Bridgestone) |
CAB
ROPS/FOPS | ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards |
SERVICE REFILL CAPACITIES
Cooling System | 48.0 l |
Crankcase | 20.0 l |
Differential - Final Drives - Front | 40.0 l |
Differential - Final Drives - Rear | 38.0 l |
Fuel Tank Size | 290.0 l |
Hydraulic Tank | 120.0 l |
Transmission | 45.0 l |
DIMENSIONS
B-Pin Height | 4188.0 mm |
B-Pin Height - Carry | 655.0 mm |
Centerline of Rear Axle to Edge of Counterweight | 2001.0 mm |
Lift Arm Clearance | 3649.0 mm |
Height - Top of ROPS | 3458.0 mm |
Height - Top of Exhaust Pipe | 3596.0 mm |
Height - Top of Hood | 2568.0 mm |
Ground Clearance | 460.0 mm |
Wheel Base | 3300.0 mm |
Centerline of Rear Axle to Hitch | 1650.0 mm |
Rack Back - Maximum Lift | 60.0 ° |
Dump Angle at Maximum Lift | 52.0 ° |
Rack Back - Carry | 45.0 ° |
Rack Back - Ground | 40.0 ° |
Height - Center Line of Axle | 750.0 mm |
TURNING RADIUS
Turning Radius - Inside of Tires | 3419.0 mm |
Turning Radius - Outside Edge of Counterweight | 6190.0 mm |
Turning Radius - Outside of Tires | 6164.0 mm |
Width - Over Tires | 2745.0 mm |
- Place of Origin: SHANDONG
- Brand Name: CATERPILLAR
- Model Number: CAT (Caterpillar)